Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Portland, OR
We provide independent Lennox air duct cleaning across Portland, OR. That means we work on the equipment itself, not as a dealer or an authorized agent of the manufacturer. What sets our Lennox work in Portland apart is moisture: in this city the job is judged by how the supply air smells and how dry the system stays, not by how much dust we pull out. Call (877) 957-0767 for a free estimate.
Why Portland Residents Choose Us for Lennox Service
Lennox forced-air equipment shows up in a lot of Portland homes, particularly in older houses where a furnace and duct system were retrofitted into a building that wasn’t designed around them. We know the coil, blower and cabinet designs well enough to spot airflow and cabinet-leak issues on sight, and we use quality parts that fit the equipment. Our technicians have up to 8 years of experience. We’re an independent shop, licensed and insured, and we’re clear about that: not manufacturer-affiliated, not authorized. Scheduling is straightforward. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. When you call, you’ll get a written estimate that sets the price before any work starts.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Portland
The failures we see most in Portland homes share a common thread: a system pulling air from somewhere damp.
- Mildew on the evaporator coil. In a damp crawl-space installation, musty supply air starts at the coil. Portland’s long wet season gives mildew a foothold on the evaporator and the blower wheel.
- Leaking cabinet seams and gasketed coil doors. Older Merit and Elite units often pull return air through gaps in the cabinet instead of through the filter. That gap is a direct path for humid crawl-space air into the airstream.
- Clogged condensate pans and drain lines. Humid months back these up. A pan that sits wet keeps the coil and the surrounding ductwork persistently moist, which feeds everything downstream.
- Sagging, crushed or disconnected flex transitions. In pre-1950 bungalows, flexible duct crossings are often lying in wet soil. We reconnect, seal and support them properly.
- Sealed systems that never got addressed. Retrofitted ductwork in east-side homes often has trunk joints that were never mastic-sealed. Small gaps over years add up.
Lennox Service in Portland: What Local Conditions Mean for Your Equipment
Portland’s vented crawl spaces stay humid through months of cool wet weather. A Lennox system that draws return air through that zone ingests damp, earthy air far more than a dust load. That single fact changes how the work is done. In a typical Portland bungalow with a retrofitted Lennox forced-air system, the homeowner notices a musty, earthy smell and blames it on the old house. A technician tracing the return finds a crushed or disconnected flex run lying in damp crawl-space soil. Reconnecting and sealing the run, cleaning the blower and evaporator coil, and treating the coil strip the odor from the supply air. Sealing cabinet seams and adding mastic at the trunk joints keeps humid crawl-space air from getting back in between rainy seasons. In Sellwood and Irvington, where 1900s-1940s foursquares and bungalows have ducts run through vented crawl spaces, that story plays out often. Cleaning is judged by odor and moisture, not visible debris.
Lennox Models & Products We Service in Portland
We work on the kinds of Lennox equipment that turn up in Portland homes: Merit Series gas furnaces, Elite Series furnaces and air handlers, Dave Lennox Signature Collection variable-capacity furnaces, and XC and XP series heat pumps paired with their matching air handlers. The service work that matters most in this city is full system cleaning, duct sealing, and evaporator coil cleaning, and we lean on all three. Where fit and longevity matter, we use quality parts that match the equipment. Where the best fix is aftermarket flex duct, mastic or insulation, we say so. For Lennox parts the equipment actually needs, we source what fits, whether OEM or quality aftermarket, and we explain the difference before ordering.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Portland
We price per system by a written estimate. Prices vary with duct run length, how many crawl-space transitions need reconnecting or sealing, whether the evaporator coil is accessible without cutting into the cabinet, and whether mildew treatment is needed. Full system cleaning in a typical Portland home usually runs in the hundreds of dollars, duct sealing adds on top, and coil cleaning is its own line item. The written estimate spells all of that out before work starts. The estimate is free. Call (877) 957-0767 for one.
Serving Portland, OR – Our Local Coverage Area
We serve Portland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Portland
My Lennox system smells musty only during Portland’s wet months – is cleaning enough? Often, yes, and sometimes the fix also needs sealing. Cleaning removes mildew from the coil and blower, but if the cabinet seams and coil-door gaskets leak, humidity finds its way back in, so we inspect those lines during the estimate. Call (877) 957-0767 to book a look.
Does a Lennox air handler in a vented crawl space need different cleaning than one in a garage? Yes. The crawl-space unit sits in constant humidity, so the coil and pan get more attention and we check every flex connection for moisture. Call (877) 957-0767 for an estimate.
Can duct sealing reduce the earthy smell coming through my Lennox registers? It can, often substantially, if the smell comes from disconnected or unsealed runs pulling crawl-space air. Sealing cabinet seams and trunk joints cuts that path. Call (877) 957-0767 to schedule.
How do I know whether my Lennox coil should be cleaned or replaced? Cleaning is right when the coil is intact but mildewed. Replacement is right when corrosion or cracks make cleaning pointless. A technician can tell you which after inspecting, and a written estimate settles the price before any work starts. Call (877) 957-0767.
What does cleaning a Lennox system in an older Portland foursquare typically involve? Cleaning the coil and blower, running the Rotobrush and Nikro systems through the trunk and branches, and inspecting flex transitions for damp-soil contact. Call (877) 957-0767 for a free estimate.
Service Areas Near Portland
We also handle Lennox duct cleaning in Milwaukie, Cedar Mill, Oak Grove, Oatfield and Lake Oswego. The housing stock shifts from Portland’s inner foursquares to mid-century ranches and 1960s tract homes, but the crawl-space moisture problem is the same, so our Lennox service follows the same method everywhere.
Book Your Lennox Service in Portland Today
Call (877) 957-0767 for a free estimate on Lennox air duct cleaning in Portland. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’ll inspect the system, explain what we found, and set one price per system before we start. Insured and bonded.
Written by the team at Steadfast Air Duct Cleaning.